KACO to launch innovative silicon carbide semiconductors based inverters
KACO new energy has added five new string inverters to its product range. With outputs between 87 and 150 kilowatts, they are suitable for PV systems on commercial and industrial roofs as well as for ground-mounted solar parks. All new inverters use innovative semiconductor components made of silicon carbide and 1,500 Volt technology. The market launch takes place internationally.
Based on the innovative semiconductor technology of the blueplanet 125 TL3, KACO new energy has developed an inverter series comprising six devices with outputs between 87 and 150 kilowatts. Credit: KACO
KACO new energy GmbH has extended its range of string inverters for 1,500 Volt projects by five devices. The blueplanet 87.0 TL3 and blueplanet 92.0 TL3 are suitable for solar power plants on commercial and industrial roofs.
Since 1,500 Volt technology is an emerging trend in the solar roof sector, both inverters are also suitable for solar modules with 1,000 Volts. The blueplanet 92.0 TL3 features a nominal AC voltage of 400 Volts: It can therefore be connected to the low-voltage distribution system without a transformer.
New inverters with 110, 137 and 150 kilowatts of output are available to planners and builders of large, utility-scale solar power plants.
Inverters for the world
The inverters are based on the technology of the blueplanet 125 TL3 which the Germany-based company introduced at the end of 2018. The advantages are mainly due to novel semiconductor components made of silicon carbide (SiC). SiC has more favorable thermal properties than silicon: Power derating at high ambient temperatures only begins at a few degrees above +50 °C.
The lower heat generation of SiC means that a smaller heat sink is used. Thanks to material savings such as these, the inverters have a weight of less than 80 kilograms which makes them comparatively light. The blueplanet 150 TL3 in particular has an extraordinary power density of almost two kilowatts per kilogram.
The new inverters are approved for numerous PV markets worldwide; the blueplanet 110 TL3 is the exception in that it is intended solely for the US market. With a view to North America, all inverters comply with protection class NEMA 4X and thus meet the highest requirements for outdoor installation.
The inverters for special requirements
Other features include: DC surge protection as standard, upgradeable AC protection and optional protection of the communication interfaces; DC disconnection, which is integrated in the XL version of the inverters and implemented in the S version by means of a separate DC-breaker; an optional PID set.
SolarPV NEEDS YOU
The aim of SolarPV is to provide you all information about Solar Energy Industry. Even the smallest amount of support is hugely appreciated. It is not necessary to be registered on PayPal to use this service. Thanks in advance!
Note to readers: